Book spine width calculator
A perfect-bound cover is one flat sheet made of the back cover, the spine and the front cover, so you need the spine width to design the cover at the right size. Enter the inner page count and the thickness of one paper leaf below to estimate it.
Open the book tool →Free · runs in browser · files never leave your device
Estimated spine width: 5.5 mm
50 leaves × 0.1 mm = 5 mm, plus 0.5 mm for glue and cover.
Features
- Estimates spine width from inner pages and paper thickness
- Adds an allowance for glue and cover
- Rounds the leaf count up for odd page counts
- Same formula Trimto uses to build the cover frame with spine in the booklet tool
- Free, runs in your browser
How it works
- Enter the number of inner pages (not counting the cover).
- Enter the thickness of one inner paper leaf in mm; measure it with a caliper or ask your printer. For reference, 150 gsm coated paper is about 0.13 mm.
- Enter an allowance for glue and cover, usually a few tenths of a mm; check with your printer.
- Use the result as the spine width when designing the cover, or open the book tool to download the cover frame with spine.
The spine width formula
A leaf of paper has two pages, so the number of leaves is half the page count, rounded up. The spine is roughly the leaf count times the thickness of one leaf, plus a small allowance for glue and cover. For example, 100 pages of 0.1 mm paper is 50 leaves × 0.1 mm = 5 mm, plus 0.5 mm gives 5.5 mm.

Where do I find the thickness of one leaf?
Thickness depends on paper type and weight and differs between mills. The surest way is to measure a stack of 50 or 100 leaves and divide, or ask your printer. Note that uncoated bulky paper is thicker than coated paper of the same weight, so the same 100 pages give a thicker spine.
| Inner paper | Reference thickness per leaf |
|---|---|
| 150 gsm coated | about 0.13 mm |
| Other paper | Measure it or ask your printer |
This is only an estimate
The real spine also depends on the binding method, glue pressure and paper tolerance. For large orders printers often make a sample copy to measure the true spine before the cover is final. Use the result for a first design and confirm it with your printer.
From spine to flat cover size
A perfect-bound flat cover is as wide as the back cover plus the spine plus the front cover. In the Trimto book tool, choose perfect binding and enter the inner paper thickness; Trimto works out the spine from the page count and lets you download a cover frame with spine as a PDF for your designer.
Step-by-step guides
Further reading
FAQ
- How thick is a book spine?
- Roughly the number of leaves times the thickness of one leaf, plus a small allowance for glue and cover. 100 pages of 0.1 mm paper gives a spine of about 5.5 mm.
- Do the pages include the cover?
- No. Enter the inner pages only. The cover is counted in the allowance for glue and cover.
- What about an odd page count?
- The calculator rounds the leaf count up, since a leaf always has two pages.
- Is the result exact?
- No, it is an estimate. Confirm the spine width with your printer before finalizing the cover.
- Is the calculator free?
- Yes. It is free and runs in your browser; nothing is sent to a server.